Formwork She Bolts

She Bolt Cones

Product Description:

Concrete Support Systems She Bolt Cone is designed for use where an inner unit is desired and a pass thru she bolt is not practical. The design of the cone provides a tight seal over the concrete tie location, which prevents grout leakage and leaves a clean finished look to the concrete. In addition, the cones set the inside dimension of the formwork and allow for a standard 2” setback from the formwork face to the inner unit.

15 mm She Bolt Cones

Part Number: 106.015.0101
Physical Measurements
Inside Diameter 5/8 in / 15.00 mm
Inner Rod Set Back 2 in / 50 mm
Max. Outside Diameter 2 3/8 in / 60 mm
Min. Outside Diameter 1 1/2 in / 40 mm
Length 4 in / 101 mm
Weight 1.08 lbs / .49 kg
Applications
Working Load 21.9 kips / 97.50 kn
Ultimate Load 43.8 kips / 195.00 kn

3/4 in She Bolt Cone with Coil Thread

Part Number: 106.075.0101
Physical Measurements
Inside Diameter 3/4 in / 19.34 mm
Inner Rod Set Back 2 in / 50 mm
Max. Outside Diameter 2 3/8 in / 60.00 mm
Min. outside Diameter 1 1/2 in / 40.00 mm
Length 4 in / 101.00 mm
Weight 1.08 lbs / .49 kg
Applications
Working Load 18.0 kips / 80.15 kn
Ultimate Load 36.0 kips / 160.30 kn

20 mm She Bolt Cones

Part Number: 106.020.0101
Physical Measurements
Inside Diameter 7/8 in / 20.00 mm
Inner Rod Set Back 2 1/2 in / 65 mm
Max. Outside Diameter 2 3/4 in / 71 mm
Min. Outside Diameter 1 3/4 in / 43 mm
Length 5 in / 127 mm
Weight 1.52 lbs / .76 kg
Applications
Working Load 38.0 kips / 172.50 kn
Ultimate Load 76.0 kips / 345.00 kn

    CSS
  • Corporate Office

    2770 South Horseshoe Drive
    Suite 4, Naples, FL 34104
    239–330–7614
    info@concretesupportusa.com

  • Copyright © 2019 Concrete Support Systems Inc.